Ceramic casting sand for sand 3d printing Featured Image

Lehlabathe la khauta bakeng sa ho bopa lehlabathe

Tlhaloso e Khutšoanyane:

Foundry Ceramic Sand, eo ka botekgeniki e bitsoang "Sintered Ceramic Sand for Foundry", eo hape e bitsoang ceramsite, ceramcast, e tšoanang le li-cerabeads, linaha tse ling li boetse li rehiloe Lehlabathe la Khauta, ke sebopeho se setle sa lijo-thollo tsa maiketsetso tse entsoeng ka bauxite ea calcined. Litaba tsa eona tse ka sehloohong ke aluminium oxide le Silicon oxide. Lehlabathe la Ceramic, le na le thepa e ntle haholo ho feta ea lehlabathe la silika ho fumana ts'ebetso e ntle ho setsi sa motheo. E na le refractoriness e phahameng, katoloso e nyane ea mocheso, coefficient e ntle ea angular, phallo e ntle haholo, ho hanyetsa ho hoholo ho apara, ho sithabela le ho tšoha ha mocheso, sekhahla se phahameng sa ho khutlisa.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Foundry Ceramic Sand, technically named as “Sintered Ceramic Sand for Foundry”, also named as ceramsite, cerabeads, ceramcast, some countries is also named Golden Sand, is good artificial spherical grain shape which is made from calcined bauxite . Its main content is aluminum oxide and Silicon oxide. Ceramic sand, has much better properties than that of silica sand to gain a better performance in foundry. It has high refractoriness, little thermal expansion, good angular coefficient, excellent flowability, High resistance to wear, crush and thermal shock, high reclamation rate.

Thepa ea Lehlabathe la Ceramic

Karolo e ka Sehloohong ea Lik'hemik'hale	Al₂O₃≥53%, Fe₂O₃＜4%, TiO₂＜3%, SiO₂≤37%
Sebopeho sa lijo-thollo	Spherical
Angular Coefficient	≤1.1
Boholo bo sa Lekaneng	45μm -2000μm
Refractoriness	≥1800℃
Boima ba Bongata	1.5-1.6 g/cm3
Katoloso ea Thermal (RT-1200℃)	4.5-6.5x10-6/k
Mmala	Lehlabathe
PH	6.6-7.3
Sebopeho sa Mineralogical	E bonolo + Corundum
Litšenyehelo tsa Asiti	＜1 ml/50g
LOI	＜0.1%

Molemo

Kaist ceramic foundry sand is about half as light as zircon and chromite, is about third as light as fused ceramic sand. Compared to these natural sand and other foundry media (the material is able to turn out about twice the number of molds per unit weight). Kaist ceramic foundry sand can deliver mold and core packages with a range of benefits that include higher-strength sand casting packages, with high heat resistance, low thermal expansion, improved final part resolution and a smoother surface finish. It can also be handled very easily, saving labor and transfer power costs. However, the manufacturer recommends paying attention to the amount of binder addition.

Kopo

Joalo ka thepa e sa nke lehlakore, lehlabathe la ceramic la KAIST le sebetsa ho li-resin tsa acid le alkali.

E ka sebelisoa haholo bakeng sa tšepe e entsoeng ka tšepe, tšepe e entsoeng ka tšepe le tšepe e sa tsitsang, joalo ka ho lahlela foam e lahlehileng, lehlabathe le koahetsoeng, lehlabathe la resin, lebokose le batang la mantlha, ho lahla ka nepo, le khatiso ea 3D.

Golden-sand-for-sand-molding-castings-(6)

Kopo

Golden-sand-for-sand-molding-castings-(3)

Ho paka le ho Romela

Golden-sand-for-sand-molding-castings-(4)

Ho paka le ho Romela

Likarolo tsa Kabo ea boholo ba Particle

Kabo ea boholo ba phatsa e ka etsoa ho latela tlhoko ea hau.

Mesh		20	30	40	50	70	100	140	200	270	Pan	AFS
μm		850	600	425	300	212	150	106	75	53	Pan
Khoutu	20/40	15-40	30-55	15-35	≤5							20±5
	30/50	≤1	25-35	35-50	15-25	≤10	≤1					30±5
	40/70		≤5	20-30	40-50	15-25	≤8	≤1				43±3
	70/40		≤5	15-25	40-50	20-30	≤10	≤2				46±3
	50/100			≤5	25-35	35-50	15-25	≤6	≤1			50±3
	100/50			≤5	15-25	35-50	25-35	≤10	≤1			55±3
	70/140				≤5	25-35	35-50	8-15	≤5	≤1		65±4
	140/70				≤5	15-35	35-50	20-25	≤8	≤2		70±5
	100/200					≤10	20-35	35-50	15-20	≤10	≤2	110±5