Ceramic casting sand for sand 3d printing Featured Image

Keramisk gjuterisand största tillverkning i Kina

Kort beskrivning:

Ceramic foundry sand, technically named as “Sintered Ceramic Sand for Foundry”, some factories also named as ceramsite, cerabeads, ceramcast, is good artificial ball sand for foundries. Its main content is aluminum oxide and Silicon oxide. Ceramic foundry sand compare with Silica sand, it has high refractoriness, little thermal expansion, good angular coefficient, excellent flowability, high resistance to wear, crush and thermal shock, high reclamation rate, it could reduce the resin addition and coating amount, increasing your castings yield, more than ten times the number of reclamations. Compare with black ceramic sand, it has almost same properties except lower bulk density and higher more than 3 times reclamation. Sintered ceramic sand bulk density is 1.45-1.6 g/cm3, but black ceramic sand is 1.8-2.1 g/cm3.

Skicka e-post till oss

Produktdetalj

Produkttaggar

Huvudkemisk komponent	Al₂O₃≥53%, Fe₂O₃＜4%, TiO₂＜3%, SiO₂≤37%
Kornform	Sfärisk
Vinkelkoefficient	≤1.1
Delvis storlek	45μm -2000μm
Eldfasthet	≥1800℃
Bulkdensitet	1,45-1,6 g/cm3
Termisk expansion（RT-1200℃）	4,5-6,5x10-6/k
Färg	Sand
PH	6.6-7.3
Mineralogisk sammansättning	Mjuk + Korund
Sur kostnad	＜1 ml/50g
LOI	＜0,1 %

Fördel

● Ceramic foundry sand offers longer work life and reduction of sand usage

● Ceramic foundry sand spherical shape compared with angular shaped grains allows for easier separation from cast parts and improved collapsibility resulting in lower scrap and casting efficiency

● Ceramic foundry sand offers lots of price savings compared with Zircon, Chromite, Black ceramic sand, Naigai cerabeads sand

● Safe to environment compared with Silica (silicosis) sand

● Lower thermal expansion and thermal conductivity. Casting dimensions are more accurate and lower conductivity provides better mold performance

● Kräver 30-50 % mindre harts

● Kan användas som enkelsand

● Erbjuder lägre sann specifik vikt och specifik yta

● Förbättrad hållbarhet jämfört med annan gjutersand

Ansökan

As a neutral material, Ceramic foundry sand is both used to acid and alkali resins.

It can be widely used in all kinds of sand molding, such as resin-coated sand, self-setting resin sand, cold core box, green sand, precision casting, lost foam casting and 3D printing etc., excellent properties help you reduce more production cost.

ceramic foundry sand largest manufacture in China (2)

ceramic foundry sand largest manufacture in China (3)

ceramic foundry sand largest manufacture in China (6)

ceramic foundry sand largest manufacture in China (5)

Delar av partikelstorleksfördelning

Partikelstorleksfördelningen kan anpassas enligt dina krav.

Maska		20	30	40	50	70	100	140	200	270	Panorera	AFS
μm		850	600	425	300	212	150	106	75	53	Panorera
Koda	20/40	15-40	30-55	15-35	≤5							20±5
	30/50	≤1	25-35	35-50	15-25	≤10	≤1					30±5
	40/70		≤5	20-30	40-50	15-25	≤8	≤1				43±3
	70/40		≤5	15-25	40-50	20-30	≤10	≤2				46±3
	50/100			≤5	25-35	35-50	15-25	≤6	≤1			50±3
	100/50			≤5	15-25	35-50	25-35	≤10	≤1			55±3
	70/140				≤5	25-35	35-50	8-15	≤5	≤1		65±4
	140/70				≤5	15-35	35-50	20-25	≤8	≤2		70±5
	100/200					≤10	20-35	35-50	15-20	≤10	≤2	110±5

Om du är intresserad av våra produkter kan du välja att lämna din information här, så kontaktar vi dig inom kort.

Produktkategorier