ខ្មែរ
Ceramic casting sand for sand 3d printing Featured Image
  • Ceramic casting sand for sand 3d printing
  • Ceramic casting sand for sand 3d printing

ខ្សាច់ស៊ីម៉ងត៍ ផលិតធំជាងគេនៅប្រទេសចិន

ការពិពណ៌នាសង្ខេប៖

Ceramic foundry sand, technically named as “Sintered Ceramic Sand for Foundry”, some factories also named as ceramsite, cerabeads, ceramcast, is good artificial ball sand for foundries. Its main content is aluminum oxide and Silicon oxide. Ceramic foundry sand compare with Silica sand, it has high refractoriness, little thermal expansion, good angular coefficient, excellent flowability, high resistance to wear, crush and thermal shock, high reclamation rate, it could reduce the resin addition and coating amount, increasing your castings yield, more than ten times the number of reclamations. Compare with black ceramic sand, it has almost same properties except lower bulk density and higher more than 3 times reclamation. Sintered ceramic sand bulk density is 1.45-1.6 g/cm3, but black ceramic sand is 1.8-2.1 g/cm3.



ព័ត៌មានលម្អិតអំពីផលិតផល

ស្លាកផលិតផល

សមាសធាតុគីមីចម្បង Al₂O₃≥53%, Fe₂O₃＜4%, TiO₂＜3%, SiO₂≤37%
រូបរាងគ្រាប់ធញ្ញជាតិ ស្វ៊ែរ
មេគុណមុំ ≤1.1
ទំហំភាគ 45μm -2000μm
ភាពធន់នឹងទឹក ≥1800℃
ដង់ស៊ីតេភាគច្រើន 1.45-1.6 ក្រាម / cm3
ការពង្រីកកំដៅ (RT-1200 ℃) ៤.៥-៦.៥x១០-៦/គ
ពណ៌ ខ្សាច់
PH 6.6-7.3
សមាសភាពរ៉ែ ទន់ + Corundum
តម្លៃអាស៊ីត ＜1 ml/50g
LOI 0.1%

អត្ថប្រយោជន៍

 

● Ceramic foundry sand offers longer work life and reduction of sand usage

● Ceramic foundry sand spherical shape compared with angular shaped grains allows for easier separation from cast parts and improved collapsibility resulting in lower scrap and casting efficiency

● Ceramic foundry sand offers lots of price savings compared with Zircon, Chromite, Black ceramic sand, Naigai cerabeads sand

● Safe to environment compared with Silica (silicosis) sand

● Lower thermal expansion and thermal conductivity. Casting dimensions are more accurate and lower conductivity provides better mold performance

● ត្រូវការជ័រតិច 30-50%

●អាចប្រើជាខ្សាច់តែមួយ

● ផ្តល់នូវទំនាញជាក់លាក់ពិតទាបជាង និងផ្ទៃជាក់លាក់

● ប្រសើរឡើងនូវភាពធន់បើប្រៀបធៀបជាមួយនឹងខ្សាច់ថ្មកំបោរផ្សេងទៀត។

ការដាក់ពាក្យ

 

As a neutral material, Ceramic foundry sand is both used to acid and alkali resins.

It can be widely used in all kinds of sand molding, such as resin-coated sand, self-setting resin sand, cold core box, green sand, precision casting, lost foam casting and 3D printing etc., excellent properties help you reduce more production cost.

ceramic foundry sand largest manufacture in China (2)
ceramic foundry sand largest manufacture in China (3)
ceramic foundry sand largest manufacture in China (6)
ceramic foundry sand largest manufacture in China (5)

ផ្នែកនៃការចែកចាយទំហំភាគល្អិត

 

ការចែកចាយទំហំភាគល្អិតអាចត្រូវបានប្ដូរតាមបំណងតាមតម្រូវការរបស់អ្នក។.

សំណាញ់

 20 30 40 50 70 100 140 200 270 ខ្ទះ AFS

μm

 850 600 425 300 212 150 106 75 53 ខ្ទះ  
កូដ 20/40 15-40 30-55 15-35 ≤5             20±5
30/50 ≤1 25-35 35-50 15-25 ≤10 ≤1         30±5
40/70   ≤5 20-30 40-50 15-25 ≤8 ≤1       43±3
70/40   ≤5 15-25 40-50 20-30 ≤10 ≤2       46±3
50/100     ≤5 25-35 35-50 15-25 ≤6 ≤1     50±3
100/50     ≤5 15-25 35-50 25-35 ≤10 ≤1     55±3
70/140       ≤5 25-35 35-50 8-15 ≤5 ≤1   65±4
140/70       ≤5 15-35 35-50 20-25 ≤8 ≤2   70±5
100/200         ≤10 20-35 35-50 15-20 ≤10 ≤2 110±5
 

ប្រសិនបើអ្នកចាប់អារម្មណ៍លើផលិតផលរបស់យើង អ្នកអាចជ្រើសរើសទុកព័ត៌មានរបស់អ្នកនៅទីនេះ ហើយយើងនឹងទាក់ទងទៅអ្នកក្នុងពេលឆាប់ៗនេះ។


ប្រភេទផលិតផល

ទុកសាររបស់អ្នក។

ប្រសិនបើអ្នកចាប់អារម្មណ៍លើផលិតផលរបស់យើង អ្នកអាចជ្រើសរើសទុកព័ត៌មានរបស់អ្នកនៅទីនេះ ហើយយើងនឹងទាក់ទងទៅអ្នកក្នុងពេលឆាប់ៗនេះ។