Ceramic casting sand for sand 3d printing Featured Image

Ko te kirikiri kirikiri te hanga nui rawa atu i Haina

Whakaahuatanga Poto:

Ceramic foundry sand, technically named as “Sintered Ceramic Sand for Foundry”, some factories also named as ceramsite, cerabeads, ceramcast, is good artificial ball sand for foundries. Its main content is aluminum oxide and Silicon oxide. Ceramic foundry sand compare with Silica sand, it has high refractoriness, little thermal expansion, good angular coefficient, excellent flowability, high resistance to wear, crush and thermal shock, high reclamation rate, it could reduce the resin addition and coating amount, increasing your castings yield, more than ten times the number of reclamations. Compare with black ceramic sand, it has almost same properties except lower bulk density and higher more than 3 times reclamation. Sintered ceramic sand bulk density is 1.45-1.6 g/cm3, but black ceramic sand is 1.8-2.1 g/cm3.

Tukuna he imeera ki a matou

Taipitopito Hua

Tohu Hua

Wae Matū Matua	Al₂O₃≥53%, Fe₂O₃＜4%, TiO₂＜3%, SiO₂≤37%
Hanga witi	Porowhita
Kohanga Koki	≤1.1
Rahi Wahi	45μm -2000μm
Rereira	≥1800℃
Kiato Nui	1.45-1.6 g/cm3
Roha Ngaaahu（RT-1200℃）	4.5-6.5x10-6/k
Tae	kirikiri
PH	6.6-7.3
Waihanga Kohuke	Ngohe + Corundum
Utu Waikawa	＜1 ml/50g
LOI	<0.1%

Painga

● Ceramic foundry sand offers longer work life and reduction of sand usage

● Ceramic foundry sand spherical shape compared with angular shaped grains allows for easier separation from cast parts and improved collapsibility resulting in lower scrap and casting efficiency

● Ceramic foundry sand offers lots of price savings compared with Zircon, Chromite, Black ceramic sand, Naigai cerabeads sand

● Safe to environment compared with Silica (silicosis) sand

● Lower thermal expansion and thermal conductivity. Casting dimensions are more accurate and lower conductivity provides better mold performance

● Me 30-50% iti ake te kapia

● Ka taea te whakamahi hei kirikiri kotahi

● Ka tuku i te taiapa motuhake me te horahanga mata motuhake

● He pai ake te mauroa ina whakaritea ki etahi atu kirikiri hangahanga

Taupānga

As a neutral material, Ceramic foundry sand is both used to acid and alkali resins.

It can be widely used in all kinds of sand molding, such as resin-coated sand, self-setting resin sand, cold core box, green sand, precision casting, lost foam casting and 3D printing etc., excellent properties help you reduce more production cost.

ceramic foundry sand largest manufacture in China (2)

ceramic foundry sand largest manufacture in China (3)

ceramic foundry sand largest manufacture in China (6)

ceramic foundry sand largest manufacture in China (5)

Nga Waahanga o te Rahi Matūriki Tohatoha

Ko te tohatoha rahi matūriki ka taea te whakarite kia rite ki to hiahia.

Matau		20	30	40	50	70	100	140	200	270	Pan	AFS
μm		850	600	425	300	212	150	106	75	53	Pan
Waehere	20/40	15-40	30-55	15-35	≤5							20±5
	30/50	≤1	25-35	35-50	15-25	≤10	≤1					30±5
	40/70		≤5	20-30	40-50	15-25	≤8	≤1				43±3
	70/40		≤5	15-25	40-50	20-30	≤10	≤2				46±3
	50/100			≤5	25-35	35-50	15-25	≤6	≤1			50±3
	100/50			≤5	15-25	35-50	25-35	≤10	≤1			55±3
	70/140				≤5	25-35	35-50	8-15	≤5	≤1		65±4
	140/70				≤5	15-35	35-50	20-25	≤8	≤2		70±5
	100/200					≤10	20-35	35-50	15-20	≤10	≤2	110±5