Ceramic casting sand for sand 3d printing Featured Image

Ceramika fandeja sablo plej granda fabrikado en Ĉinio

Mallonga priskribo:

Ceramic foundry sand, technically named as “Sintered Ceramic Sand for Foundry”, some factories also named as ceramsite, cerabeads, ceramcast, is good artificial ball sand for foundries. Its main content is aluminum oxide and Silicon oxide. Ceramic foundry sand compare with Silica sand, it has high refractoriness, little thermal expansion, good angular coefficient, excellent flowability, high resistance to wear, crush and thermal shock, high reclamation rate, it could reduce the resin addition and coating amount, increasing your castings yield, more than ten times the number of reclamations. Compare with black ceramic sand, it has almost same properties except lower bulk density and higher more than 3 times reclamation. Sintered ceramic sand bulk density is 1.45-1.6 g/cm3, but black ceramic sand is 1.8-2.1 g/cm3.

Sendu retpoŝton al ni

Produkta Detalo

Produktaj Etikedoj

Ĉefa Kemia Komponanto	Al₂O₃≥53%, Fe₂O₃＜4%, TiO₂＜3%, SiO₂≤37%
Grajna Formo	Sfera
Angula Koeficiento	≤1.1
Aparta Grandeco	45μm -2000μm
Obstineco	≥1800℃
Granda denseco	1,45-1,6 g/cm3
Termika Vastiĝo (RT-1200 ℃)	4,5-6,5x10-6/k
Koloro	Sablo
PH	6.6-7.3
Mineralogia Komponado	Mola + Korundo
Acida Kosto	＜1 ml/50g
LOI	<0.1%

Avantaĝo

● Ceramic foundry sand offers longer work life and reduction of sand usage

● Ceramic foundry sand spherical shape compared with angular shaped grains allows for easier separation from cast parts and improved collapsibility resulting in lower scrap and casting efficiency

● Ceramic foundry sand offers lots of price savings compared with Zircon, Chromite, Black ceramic sand, Naigai cerabeads sand

● Safe to environment compared with Silica (silicosis) sand

● Lower thermal expansion and thermal conductivity. Casting dimensions are more accurate and lower conductivity provides better mold performance

● Postulas 30-50% malpli da rezino

● Povas esti uzata kiel ununura sablo

● Proponas pli malaltan veran specifan pezon kaj specifan surfacareon

● Plibonigita fortikeco kompare kun aliaj fandaj sabloj

Apliko

As a neutral material, Ceramic foundry sand is both used to acid and alkali resins.

It can be widely used in all kinds of sand molding, such as resin-coated sand, self-setting resin sand, cold core box, green sand, precision casting, lost foam casting and 3D printing etc., excellent properties help you reduce more production cost.

ceramic foundry sand largest manufacture in China (2)

ceramic foundry sand largest manufacture in China (3)

ceramic foundry sand largest manufacture in China (6)

ceramic foundry sand largest manufacture in China (5)

Partoj de Partiklogranda Distribuo

La distribuo de partikla grandeco povas esti personecigita laŭ via postulo.

Maŝo		20	30	40	50	70	100	140	200	270	Pan	AFS
μm		850	600	425	300	212	150	106	75	53	Pan
Kodo	20/40	15-40	30-55	15-35	≤5							20±5
	30/50	≤1	25-35	35-50	15-25	≤10	≤1					30±5
	40/70		≤5	20-30	40-50	15-25	≤8	≤1				43±3
	70/40		≤5	15-25	40-50	20-30	≤10	≤2				46±3
	50/100			≤5	25-35	35-50	15-25	≤6	≤1			50±3
	100/50			≤5	15-25	35-50	25-35	≤10	≤1			55±3
	70/140				≤5	25-35	35-50	8-15	≤5	≤1		65±4
	140/70				≤5	15-35	35-50	20-25	≤8	≤2		70±5
	100/200					≤10	20-35	35-50	15-20	≤10	≤2	110±5

Se vi interesiĝas pri niaj produktoj, vi povas elekti lasi viajn informojn ĉi tie, kaj ni baldaŭ kontaktos vin.

Kategorioj de produktoj