Ceramic casting sand for sand 3d printing Featured Image

Керамик цутгах элс Хятад дахь хамгийн том үйлдвэрлэл

Товч тодорхойлолт:

Ceramic foundry sand, technically named as “Sintered Ceramic Sand for Foundry”, some factories also named as ceramsite, cerabeads, ceramcast, is good artificial ball sand for foundries. Its main content is aluminum oxide and Silicon oxide. Ceramic foundry sand compare with Silica sand, it has high refractoriness, little thermal expansion, good angular coefficient, excellent flowability, high resistance to wear, crush and thermal shock, high reclamation rate, it could reduce the resin addition and coating amount, increasing your castings yield, more than ten times the number of reclamations. Compare with black ceramic sand, it has almost same properties except lower bulk density and higher more than 3 times reclamation. Sintered ceramic sand bulk density is 1.45-1.6 g/cm3, but black ceramic sand is 1.8-2.1 g/cm3.

Бидэн рүү имэйл илгээнэ үү

Бүтээгдэхүүний дэлгэрэнгүй

Бүтээгдэхүүний шошго

Химийн үндсэн бүрэлдэхүүн хэсэг	Al₂O₃≥53%, Fe₂O₃＜4%, TiO₂＜3%, SiO₂≤37%
Үр тарианы хэлбэр	Бөмбөрцөг хэлбэртэй
Өнцгийн коэффициент	≤1.1
Хэсэгчилсэн хэмжээ	45μm -2000μm
Галд тэсвэртэй байдал	≥1800℃
Их хэмжээний нягтралтай	1.45-1.6 г/см3
Дулааны тэлэлт (RT-1200℃)	4.5-6.5x10-6 / к
Өнгө	Элс
PH	6.6-7.3
Эрдэс судлалын найрлага	Зөөлөн + Корунд
Хүчиллэг зардал	＜1 ml/50g
LOI	＜0.1%

Давуу тал

● Ceramic foundry sand offers longer work life and reduction of sand usage

● Ceramic foundry sand spherical shape compared with angular shaped grains allows for easier separation from cast parts and improved collapsibility resulting in lower scrap and casting efficiency

● Ceramic foundry sand offers lots of price savings compared with Zircon, Chromite, Black ceramic sand, Naigai cerabeads sand

● Safe to environment compared with Silica (silicosis) sand

● Lower thermal expansion and thermal conductivity. Casting dimensions are more accurate and lower conductivity provides better mold performance

● 30-50% бага давирхай шаардагдана

● Дан элс болгон ашиглаж болно

● Жинхэнэ хувийн жин бага ба тодорхой гадаргуугийн талбайг санал болгодог

● Бусад цутгах элстэй харьцуулахад бат бөх чанар сайжирсан

Өргөдөл

As a neutral material, Ceramic foundry sand is both used to acid and alkali resins.

It can be widely used in all kinds of sand molding, such as resin-coated sand, self-setting resin sand, cold core box, green sand, precision casting, lost foam casting and 3D printing etc., excellent properties help you reduce more production cost.

ceramic foundry sand largest manufacture in China (2)

ceramic foundry sand largest manufacture in China (3)

ceramic foundry sand largest manufacture in China (6)

ceramic foundry sand largest manufacture in China (5)

Хэмжээний хэсгүүдийн хуваарилалт

Бөөмийн хэмжээ хуваарилалтыг таны шаардлагад нийцүүлэн өөрчилж болно.

Торон		20	30	40	50	70	100	140	200	270	Пан	AFS
μm		850	600	425	300	212	150	106	75	53	Пан
Код	20/40	15-40	30-55	15-35	≤5							20±5
	30/50	≤1	25-35	35-50	15-25	≤10	≤1					30±5
	40/70		≤5	20-30	40-50	15-25	≤8	≤1				43±3
	70/40		≤5	15-25	40-50	20-30	≤10	≤2				46±3
	50/100			≤5	25-35	35-50	15-25	≤6	≤1			50±3
	100/50			≤5	15-25	35-50	25-35	≤10	≤1			55±3
	70/140				≤5	25-35	35-50	8-15	≤5	≤1		65±4
	140/70				≤5	15-35	35-50	20-25	≤8	≤2		70±5
	100/200					≤10	20-35	35-50	15-20	≤10	≤2	110±5