Ceramic casting sand for sand 3d printing Featured Image

Κεραμική άμμος χυτηρίου μεγαλύτερη κατασκευή στην Κίνα

Σύντομη περιγραφή:

Ceramic foundry sand, technically named as “Sintered Ceramic Sand for Foundry”, some factories also named as ceramsite, cerabeads, ceramcast, is good artificial ball sand for foundries. Its main content is aluminum oxide and Silicon oxide. Ceramic foundry sand compare with Silica sand, it has high refractoriness, little thermal expansion, good angular coefficient, excellent flowability, high resistance to wear, crush and thermal shock, high reclamation rate, it could reduce the resin addition and coating amount, increasing your castings yield, more than ten times the number of reclamations. Compare with black ceramic sand, it has almost same properties except lower bulk density and higher more than 3 times reclamation. Sintered ceramic sand bulk density is 1.45-1.6 g/cm3, but black ceramic sand is 1.8-2.1 g/cm3.

Στείλτε μας email

Λεπτομέρεια προϊόντος

Ετικέτες προϊόντων

Κύριο Χημικό Συστατικό	Al₂O₃≥53%, Fe₂O₃＜4%, TiO₂＜3%, SiO₂≤37%
Σχήμα κόκκου	Σφαιρικός
Γωνιακός Συντελεστής	≤1.1
Μερικό μέγεθος	45μm -2000μm
Ανυποταξία	≥1800℃
Χύδην πυκνότητα	1,45-1,6 g/cm3
Θερμική διαστολή (RT-1200℃)	4,5-6,5x10-6/κ
Χρώμα	Αμμος
PH	6.6-7.3
Ορυκτολογική Σύνθεση	Μαλακό + Κορούνδιο
Κόστος οξέος	＜1 ml/50g
LOI	＜0,1%

Πλεονέκτημα

● Ceramic foundry sand offers longer work life and reduction of sand usage

● Ceramic foundry sand spherical shape compared with angular shaped grains allows for easier separation from cast parts and improved collapsibility resulting in lower scrap and casting efficiency

● Ceramic foundry sand offers lots of price savings compared with Zircon, Chromite, Black ceramic sand, Naigai cerabeads sand

● Safe to environment compared with Silica (silicosis) sand

● Lower thermal expansion and thermal conductivity. Casting dimensions are more accurate and lower conductivity provides better mold performance

● Απαιτεί 30-50% λιγότερη ρητίνη

● Μπορεί να χρησιμοποιηθεί ως ενιαία άμμος

● Προσφέρει χαμηλότερο πραγματικό ειδικό βάρος και ειδική επιφάνεια

● Βελτιωμένη αντοχή σε σύγκριση με άλλες άμμους χυτηρίου

Εφαρμογή

As a neutral material, Ceramic foundry sand is both used to acid and alkali resins.

It can be widely used in all kinds of sand molding, such as resin-coated sand, self-setting resin sand, cold core box, green sand, precision casting, lost foam casting and 3D printing etc., excellent properties help you reduce more production cost.

ceramic foundry sand largest manufacture in China (2)

ceramic foundry sand largest manufacture in China (3)

ceramic foundry sand largest manufacture in China (6)

ceramic foundry sand largest manufacture in China (5)

Μέρη κατανομής μεγέθους σωματιδίων

Η κατανομή μεγέθους σωματιδίων μπορεί να προσαρμοστεί σύμφωνα με τις απαιτήσεις σας.

Πλέγμα		20	30	40	50	70	100	140	200	270	Τηγάνι	AFS
μm		850	600	425	300	212	150	106	75	53	Τηγάνι
Κώδικας	20/40	15-40	30-55	15-35	≤5							20±5
	30/50	≤1	25-35	35-50	15-25	≤10	≤1					30±5
	40/70		≤5	20-30	40-50	15-25	≤8	≤1				43±3
	70/40		≤5	15-25	40-50	20-30	≤10	≤2				46±3
	50/100			≤5	25-35	35-50	15-25	≤6	≤1			50±3
	100/50			≤5	15-25	35-50	25-35	≤10	≤1			55±3
	70/140				≤5	25-35	35-50	8-15	≤5	≤1		65±4
	140/70				≤5	15-35	35-50	20-25	≤8	≤2		70±5
	100/200					≤10	20-35	35-50	15-20	≤10	≤2	110±5