How to Choose Ceramic Foundry Sand for the Green Sand Casting Foundry Process

Ceramic foundry sand for the green sand casting foundry process should match the wet mold system, required permeability, and target particle distribution. Our sintered ceramic foundry sand is suited to green sand molds that use bentonite clay and need a selectable grain grading.

How to Choose Ceramic Foundry Sand for the Green Sand Casting Foundry Process
Illustration for reference; see the product page for actual photos and specifications.

Green sand molds contain moisture, and bentonite clay mixed with the sand helps the mold hold together before molten metal is poured. For this sand casting foundry process, the useful purchasing question is whether the sand can provide the required flow through the mold while matching the foundry’s grading and reuse objectives.

Start with the mold system

Choose Ceramic foundry sand for green sand process when your line uses wet sand molds with clay as the bonding material. The product is a spherical sintered ceramic sand made through powder, pelletizing, sintering, and grading processes. Its main crystal structure is Mullite and Corundum.

The product is suited to green sand work where permeability and sand reuse matter. Under the same process conditions, green sand mixed with this sintered ceramic sand has higher permeability than green sand mixed with quartz sand. Its high-temperature resistance and mechanical reclamation performance can support more reuse and lower waste sand emissions.

Check permeability and grain shape together

Permeability is a practical check for mold filling and gas movement. The spherical grain shape gives the sand flow and filling characteristics needed when the green sand mix must move through molding equipment. The product also has thermochemical stability, low thermal expansion, and resistance to impact and abrasion.

Select the grading that matches your mold design and process settings. The available codes include 40/70, 70/40, 50/100, 100/50, and 70/140. Particle size distribution can be customized to your requirement, so your request should identify the grading or particle distribution used in the current green sand process.

What to weigh

Green sand compatibility · wet molds using bentonite clay
Particle grading · match AFS and particle-size distribution
Permeability target · compare flow through the green sand mix
Reuse objective · assess mechanical reclamation and waste sand emissions

Match the grading to your process

The listed grading options correspond to different AFS values and particle-size distributions. Use the option that matches the sand system you are replacing or adjusting.

CodeAFS
40/7043±3
70/4046±3
50/10050±3
100/5055±3
70/14065±4

The percentages within each grading differ, so do not choose by code alone. Compare the required particle distribution with the grading needed by your mold and molding equipment.

Who should choose this product

This ceramic foundry sand fits a foundry running green sand molds with bentonite clay and seeking a spherical grain for permeability and filling. It also fits a process where higher mechanical reclamation, reduced waste sand emissions, and a selectable particle distribution are purchase priorities.

Choose a grading after checking the current sand blend, molding equipment, and required permeability. The product is supplied as a graded ceramic sand for this green sand application, while the particle distribution can be customized to the requirement.

Your shortlist

Ceramic foundry sand for green sand process · green sand molds using bentonite clay and requiring selected grading

Prepare the specification request

Send the supplier your current sand code or particle distribution, AFS value, green sand formulation, molding equipment, and required casting alloy. This gives us the information needed to match the ceramic foundry sand to your sand casting foundry process. Check the proposed grading against your existing mold behavior before placing the order.

The company

Shenghuo New Material Technology Co., Ltd.

Shenghuo New Material Technology Co., Ltd. was established in 2007 and is located in Jinan New District, Handan City, Hebei Province. Covering an area of 150 acres, there are two most advanced domestic production lines, with an annual production capacity of 200,000 tons, and 36 experts and technical personnel of various types, accounting for more than 20% of the total number of enterprises. SHXK is the largest leader and manufacturer of Sintered Ceramic Sand for foundry in China.…

About Us ↗Visit company website ↗
Post time:Nov . 17, 2026 01:12

Next:
Leave Your Message

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.